To make your modern home more perfect, you can create contemporary floor mirrors in your home. Using these floors to design your home can be a fun plan. In the resulting a good product will be decided by creativity and imagination. However; equally important you should learn from the good artist the ways to make the masterpiece. It’s so important for you tu choose the best tools and the right materials for the project.
The first step is building the frame. Measure the length of the mirror. Then cut it into two pieces of trims. It must be at least 2 inches longer than the length of the mirror to allow for the 45-degree angle at each corner. After doing it, cut the groove. By using the miter box, cut the each end of the trim at 45-degree angle. Don’t cut them too short. For the good result of contemporary floor mirrors, as a guide you can use the corner of the mirror. Adhere the pieces of trim at the corner. Then, clamp them together and let them dry absolutely.
The second step is building the legs. You should cut the curve. The measurement is into the 1- by 2-inch pieces of lumber with the router. At the end of the one of two the pieces, cut a 45-degree corner. Like a frame, you should match ends at right corner. Put two corners of two of the 1- by 2-inch pieces in the one mark. It makes the legs that are spread the form of “A”. Then, insert the screws in both pieces. Repeat doing it in the other two 1- by 2-inch pieces on the other side of the frame. The last step is decorating and adding the mirror. Before adding the mirror, paint it first. After the painting it, place the mirror into the frame. Try to create contemporary floor mirrors by your own ideas! It will make your home look different with the other.